Tripp-lite B030-002-R Manuale Utente Scaricare il pdf (Pagina 3)

When Connecting a USB Computer

1. Connect a USB-to-PS/2 adapter (Tripp Lite Model:

B015-000) to the USB port on your computer. This

will convert the single USB port into a PS/2

keyboard port and PS/2 mouse port.

2. Follow the instructions on the opposite page for

“When Connecting a PS/2 Computer.”

STEP 3) Turn On Your Computers

Operation (Hot Key Port Selection)

Hot Key navigation lets you select the active PC or

initiate an Auto Scan procedure directly from the

keyboard.

1. Selecting the Active Port:

Option 1: Toggle between PCs by pressing and

releasing the [Scroll Lock] key twice, then pressing

the “



” or “



” key.

Option 2: Select a specific PC by pressing and

releasing the [Scroll Lock] key twice, then pressing

the [1] key* to connect to port 1 or the [2] key* to

connect to port 2.

* Note: To connect to the ports, you must use the

number keys located above the letter keys on

the keyboard. Do not use the number keys

grouped together on the numeric keypad

located on the right side of the keyboard.

Installation

Before you begin, make sure that the power to all PCs

being connected to the KVM switch has been turned

off.

NOTE: To prevent damage to your installation due to

ground potential difference, make sure that all

devices on the installation are properly grounded.

STEP 1) Connecting the Console

1. With all computers turned off, connect the cable from

your VGA monitor to the female VGA port on the

front panel of the KVM switch.

2. Connect your PS/2 keyboard and mouse directly into

the PS/2 keyboard and mouse ports on the front panel

of the KVM switch.

STEP 2) Connecting a Computer

The KVM switch has two cable kits (each with a key-

board, monitor and mouse connection) permanently

attached to the rear of the switch. Use one kit for each

computer. The kits are labeled “Port 1” and “Port 2”;

both ports have a corresponding LED on the top of the

switch that signifies when the port is selected.

When Connecting a PS/2 Computer

1. Connect the monitor connector (blue, with video

icon) of one cable kit to the VGA port on your

computer.

2. Connect the PS/2 mouse connector (green, with

mouse icon) of the same cable kit to the mouse port

on your computer.

3. Connect the PS/2 keyboard connector (purple, with

keyboard icon) of the same cable kit to the keyboard

port on your computer.

200312045 B030-002-R owners manual.qxd 1/6/2004 3:26 PM Page 4

1 2 3 4 5 6 7 8 ... 16 17

Commenti su questo manuale

Nessun commento

Tripp-lite B030-002-R Manuale Utente Pagina 3

Commenti su questo manuale

Prodotti e manuali riguardandi Accessori per computer Tripp-lite B030-002-R